You will find three main types of Press Brakes:
Mechanical Press Brakes
A mechanical press brake is a machine used to bend sheet metal. It’s a large top beam and a scaled-down less beam, that are connected by a hydraulic cylinder. The top beam is raised and the reduced beam is pressed down onto the sheet metal, which is then bent.
Hydraulic Press Brakes
The most common kind of press brake is the hydraulic press brake, which relies on a hydraulic cylinder to create the force needed to bend the material.
Electric Press Brakes
An electric powered press brake uses hydraulic pressure to bend metal sheets. A Ram travels along the bed of the brake, and the hydraulic pressure is applied to the Ram, which drives down on the metallic sheet, bending it.
Professional metalworkers, their website link ,use it to produce customized metal parts and accessories.
You will find many benefits to using a press brake for metal fabrication. Several of the benefits include:
- Increased accuracy and consistency when bending metal parts
- Can develop parts with a tighter curvature than could be achieved with a hammer or any other hand-bending methods
- Can produce several components from a single sheet of metal
- Parts could be easily and quickly customized to certain dimensions
Several press brake applications are box and pan forming, notching, riveting, and shearing. You can find more details at good press brake products .
Make sure to stick to these press brake safety tips
- Generally use safety goggles when operating a press brake.
- Make sure the brake is properly calibrated before use.
- Never reach over the press brake while it is in use.
- Make sure that the workpiece is adequately secured before starting to press.
- Ensure that the brake is properly lubricated and cooled before use.
The press brake is the most commonly used machine in the sheet metal fabrication industry, accounting for more than 70% of all the bending operations. The press brake is capable of forming parts with a bending direction of as much as 180 degrees.